finishing nail การใช้

• Tap the new board in place and secure it with finishing nails.
• Use 8d finishing nails to attach the molding directly to the wall studs.
• Use 4d galvanized ( these will not rust ) finishing nails.
• You may also need 8d finishing nails to secure loose boards.
• The tank contained hundreds of salmon fry no larger than wire finishing nails.
• You can fasten loose floorboards with wood screws or finishing nails.
• Finishing nails were scattered on the ground near the pipe.
• Common nails, in general, would work better than finishing nails.
• You'll need a supply of 4d and 6d finishing nails.
• Finishing Nails-- Probably the second most familiar type.
• Casing Nails-- Resemble finishing nails, but are larger in diameter, stronger and have greater holding power.
• Finishing nails are used for cabinetry and molding.
• Their conical heads differ slightly from those of finishing nails, but are also meant to be concealed.
• On a foggy, soggy day at Southern Hills, Lehman, 37, drove in a finishing nail with a sledgehammer.
• Smaller finishing nails are called brads.
• If not, check to see if there are any finishing nails that go through the jamb into the studs.
• Narrow moldings will be held in place with finishing nails driven through the face of the piece into the jamb.
• To fasten a loose tread or riser to an open stringer, drive finishing nails through the steps directly into the stringer.
• Then toenail ( drive them at an angle ) 8d finishing nails through the face of the board into the subfloor.
• At the front of the tread where it rests on the riser, drive 6d finishing nails through the tread into the riser.